Package protection solution
 
Product code N-600
General specifications
N-600 package protective solution has the following properties:
1. Removal of calcium and magnesium deposits caused by the hardness of the water used in the system.
2. Effective compounds to remove oxygen dissolved in water, which prevents spot corrosion in the water flow path.
3. Creating a corrosion protection layer on the surface of metals.
4. Effective compounds to prevent sediment from settling on the wall surface.
5. Preventing the creation of electrochemical cells in the water circulation system, which causes the creation of air in the radiator.
6. Increasing heat transfer efficiency and reducing maintenance costs.
Physical and chemical properties
1. Appearance characteristics of the milky liquid
2. Solubility in water Dispersible in water
3. pH (@25 ˚C) 6-7
4. Viscosity (cSt) 80-200
5. Density (gr/cm3) 1.01-1.04
Indications
Heating and home package
• Domestic and industrial cooling chillers
• Cooling circuits of industrial molds
Method of Use
1. The amount of consumption of this solution varies according to the amount of deposits in the converter. In cases where the amount of deposits in the converter is low, in order to prevent sedimentation, prevent corrosion and create a protective layer, a total amount of thermal solution in 100 liters of water is recommended.
2. If you need to dilute the N-600 solution during use, be sure to dilute it with water without hardness.
Safety and maintenance
1. Use gloves when using.
2. Do not combine or use this solution at the same time with other chemical compounds.
3. In case of splashing the solution on the skin and eyes, wash with plenty of water.
4. This solution should be kept at a temperature lower than 30˚C and in an environment where freezing does not occur and away from sunlight.
packing
This product is generally delivered to customers in 1 liter bottles. (If requested by the customer, it is possible to pack in other volumes.)
Package protection solution
 
Product code N-600
General specifications
1. Removal of calcium and magnesium deposits caused by the hardness of the water used in the system.
2. Effective compounds to remove oxygen dissolved in water, which prevents spot corrosion in the water flow path.
3. Creating a corrosion protection layer on the surface of metals.
4. Effectie compounds to prevent from settling on the wall surface.
5. Preventing the creatiocosts.
Physical and chemical properties
1. Appearance of the milky liquid
2. Solubility in water Dispersible in water
3. pH (@25 ˚C) 6-7
4. Viscosity (cSt) 80-200
5. Density (gr/cm3)
Indications
Heating and home package
• Domestic and cooling
• Cooling orial molds
Method of Use
Safety and
packing
(If requested by the customer, it is possible to pack in other volumes.)
