N-301/R2 Boiler Treatment provides comprehensive protection against corrosion and sedimentation in steam generation systems. This NALCO 354 equivalent solution is specially formulated for exchangers, tanks, and water transmission lines.
Product Overview
Product Name:
Anti-corrosion and sedimentation of exchangers, tanks and water transmission lines
Product Code:
N-301/R2
Appearance:
Clear, colorless viscous liquid
N-301/R2 Applications:
Used in steam generation boilers
Packaging type:
Packaged and shipped in 20, 60 and 200 kg gallons or at the customer’s request
Amount of use:
Determined according to the analysis of the water entering the exchanger and the specifications of the exchanger
Mechanism of Operation
- Flocculation of water entering the boiler and prevention of sedimentation
- Removal of dissolved oxygen in water entering the boiler and prevention of corrosion
- Creation of a protective surface against corrosion (surface nitrification)
- Adjustment of the pH of water entering the exchanger
- Reduction of the amount of carry over
Safety Considerations
- Avoid mixing with other chemicals without coordination with the manufacturer.
- Avoid storing near strong oxidants.
- In case of contact with the body, rinse with plenty of water
Conditions of Use
- Dilution in soft water
- The general amount of injection is 300 mg per liter.
www.nano-ngcm.com – info@nano-ngcm.com
Technical Data Sheet: N-301/R2 Boiler Treatment
(Equivalent to NALCO 354)
Features and Benefits
- Corrosion protection over a wide range of temperatures and pH
- Prevents deposits from forming on the internal surfaces of the system
- Removing old deposits over time
- Adjusting the pH of the water entering the system.
General Information
N-301/R2 Boiler Treatment is a high scale and corrosion inhibitor designed to improve the performance of boilers and circulating systems. This product protects systems against corrosion and deposits. Based on multiple phosphates and ligand compounds, it suspends and traps sediments in water, preventing formation on system walls. It also contains multiple anti-corrosion compounds that protect metals from corrosion and galvanic cell formation.
Method of Use
It is recommended to inject the solution at a rate of 1000 grams per cubic meter for the initial charge, based on the total water in the system. In subsequent charges, the consumption rate is 300 grams per cubic meter based on the additive water. Use a dosing pump for accurate injection.
Packaging
This product is available in 20L, 60L gallons or 1000L tanks and in other packaging weights upon customer request.
Storage and Transportation
Store and transport in original packaging containers. Keep in a cool, dry place away from direct sunlight and protected from freezing.
Health Information
- Use appropriate gloves and gown when using.
- In case of contact with skin or eyes, wash with plenty of water and consult a doctor if necessary.
Technical Support
Nami Gostar Chemical Company provides product support for all applications.
Typical Physical Properties
- Appearance: Clear viscous liquid
- Solubility in water: Soluble
- Solubility in hydrocarbons: Insoluble
- pH at 25°C: 10-11
- 1% Solution pH: 7-8
- Density (g/cm³): 1.02-1.06
- Flash Point: Non-flammable
Contact Information
For technical specifications: Contact our boiler treatment specialists
