N-300/R1 Water Treatment provides specialized protection against corrosion and sedimentation in industrial water systems. This NALCO 754 equivalent solution is engineered for exchangers, tanks, and water transmission lines.
N-300/R1 Product Overview
Product Name:
Anti-corrosion & sedimentation of exchangers, tanks and water transmission lines
Product Code:
N-300/R1
Appearance:
Clear, colorless viscous liquid
N-300/R1 Applications:
Water exchangers, tanks and transmission lines
Packaging type:
Packaged and shipped in 20, 60 and 200 kg gallons or at the customer’s request
Amount of use:
Determined according to the analysis of the water entering the exchanger and the specifications of the exchanger
N-300/R1 Mechanism of Operation
- Flocculation of water entering the boiler and prevention of sedimentation
- Removal of dissolved oxygen in water entering the boiler and prevention of corrosion
- Creation of a protective surface against corrosion (surface nitrification)
- Adjustment of the pH of water entering the exchanger
- Reduction of the amount of carry over
Safety Considerations
- Avoid mixing with other chemicals without coordination with the manufacturer.
- Avoid storing near strong oxidants.
- In case of contact with the body, rinse with plenty of water.
Conditions of Use
- Dilution in soft water
- The general amount of injection is 300 mg per liter.
www.nano-ngcm.com – info@nano-ngcm.com
Technical Data Sheet: N-300/R1 Water Treatment
(Equivalent to NALCO 754)
Features and Benefits
- Corrosion protection over a wide range of temperatures and pH
- Removing old deposits over time
- Adjusting the pH of the water entering the system.
General Information
N-300/R1 Water Treatment is a high scale and corrosion inhibitor designed to improve the performance of boilers and circulating systems. This product protects systems well against corrosion and deposits. Based on multiple phosphates and ligand compounds, it suspends and traps sediments in the water and prevents sediment formation on system walls. Also, through multiple anti-corrosion compounds, it protects system metals from corrosion and galvanic cell formation.
Method of Use
It is recommended to inject the solution at a rate of 100 grams per cubic meter for the initial charge, based on the total water in the system. In subsequent charges, the consumption rate is 30 grams per cubic meter based on the additive water. Use a high-precision scale for accurate material injection.
Packaging
This product is available in 20 kg containers or 1000 kg tanks and in other packaging weights upon customer request.
Storage and Transportation
It is recommended to use the same original packaging containers to store and transport the solution, and to store the product in a cool, dry place away from direct sunlight and protected from freezing.
Health Information
- Use appropriate gloves and gown when using.
- In case of contact with skin or eyes, wash the area with plenty of water and consult a doctor if necessary.
Technical Support
Nami Gostar Chemical Company provides product support for all N-300/R1 Water Treatment applications.
Typical Physical Properties
- Appearance: Clear viscous liquid
- Solubility in water: Soluble
- Solubility in hydrocarbons: Insoluble
- pH at 25°C: 10-11
- 1% Solution pH: 7-8
- Density (g/cm³): 1.02-1.06
- Flash Point: Non-flammable
Contact Information
For N-300/R1 specifications: Contact our water treatment specialists
